I am using SDR console and a FubCube Pro+ dongle.
I am also using virtual audio cable to feed my sdr audio direct to the WSJT software
Start up WSJT software, you will see 3 windows open
Take note of this DOS screen with the audio settings, note audio cable out (device 3) and Microsoft sound mapper output (device 4)
In the main screen, click on Setup and then Options, you can fill in your call sign and locator details.
But pay close attention to Audio IN and Audio Out change to 3 and 4, in this example, or where your virtual audio cable is set. When using a real radio and real cables, use the normal in and out sound card.
Next set your mode click on mode and choose JT65B
Now to start listening to the SDR click on MONITOR, you will see the last of the 3 screens below start to receive a signal, you may need to turn your volume down.
Check receive noise is not in the red (high or low) after a minute or so you should start getting the text decoded for GB3VHF and its locator JO01EH
The monitor screen above shows a nice solid line when GB3VHF is transmitting its JT65B text.
The scattered image is the CW / Morse identity.
GB3VHF does a minute of each type of signal.
You are now set up to receive JT65 and its time to start looking for moon bounce signals.
73
James M0JFP
