Monday, 11 April 2016
Friday, 8 April 2016
Tuesday, 5 April 2016
Fun cube and dashboard
We got given a FubCube Pro-Plus to play with so I set this up on a 2/70 co linear white stick antenna and installed funcube dashboard on windows 7 laptop
You need to initially go into file--settings and in audio tab, change input device to *line Fun-cube Dongle V2.0*
each pass you will need to select the Frequency preset to the desired Fun-cube satellite you wish to monitor. In the Warehouse tab you will need to add your account details, you can register here
You can track fun-cube 1 satellite here
You can track fun-cube 2 satellite here
Once set up you will want to put a check in the auto tune option on the bottom left of the screen.
Once the signal is heard you should start seeing Fitter messages come down the screen
You will also see that the dashboard is populated and updated.
Monday, 4 April 2016
Virtual Radar Server and Modes_RX *Funcube*
sudo apt-get install rtl-sdr
wget http://www.virtualradarserver.co.uk/Files/VirtualRadar.tar.gz
tar -zxvf VirtualRadar.tar.gz
To start listening to aircraft using the funcube pro-plus and to start a SBS-1 compatible server on port 30003 type the following:
modes_rx -d -s osmocom -P
Hopefully you will see the following screen
You may see a few errors here but as long as you get some data all is good. Experiment with a better antenna, etc.
Now if you have already installed MONO skip to step X below
Installing Mono 4
sudo sh -c "echo 'deb http://plugwash.raspbian.org/mono4 jessie-mono4 main' >> /etc/apt/sources.list"
apt-get update
sudo apt-get install mono-complete
Now create a file using your favourite editor in the same directory where you just downloaded virtual radar to
create a file called: VirtualRadar.exe.config
copy and save the below text.
Open a second terminal window to start Virtual Radar type:
mono VirtaulRadar.exe
Here is my running Virtual radar, you will need to set yours up following the instruction below for the first time.
Under Feed Status, right click on Receiver and then select configure feed
copy the settings here in the screenshot
127.0.0.1 is the local loop back address on the pi
30003 is the port our SBS-1 server is running on.
click on OK or escape to go back to virtual radar
You can now max out your poor raspberry pi and try opening a web page to see the planes, or better still open a web browser on your pc / laptop to your raspberry pi address on port 8080
for example http://192.168.0.22:8080/VirtualRadar (note capital V and R)
You should not be able to see and monitor planes in the local area.
wget http://www.virtualradarserver.co.uk/Files/VirtualRadar.tar.gz
tar -zxvf VirtualRadar.tar.gz
To start listening to aircraft using the funcube pro-plus and to start a SBS-1 compatible server on port 30003 type the following:
modes_rx -d -s osmocom -P
Hopefully you will see the following screen
You may see a few errors here but as long as you get some data all is good. Experiment with a better antenna, etc.
Now if you have already installed MONO skip to step X below
Installing Mono 4
sudo sh -c "echo 'deb http://plugwash.raspbian.org/mono4 jessie-mono4 main' >> /etc/apt/sources.list"
apt-get update
sudo apt-get install mono-complete
Now create a file using your favourite editor in the same directory where you just downloaded virtual radar to
create a file called: VirtualRadar.exe.config
copy and save the below text.
<?xml version="1.0"?> <configuration> <configSections> </configSections> <startup> <supportedRuntime version="v2.0.50727"/> </startup> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="Mono.Data.Sqlite" publicKeyToken="0738eb9f132ed756" culture="neutral" /> <bindingRedirect oldVersion="2.0.0.0" newVersion="4.0.0.0" /> </dependentAssembly> </assemblyBinding> </runtime> </configuration>
Open a second terminal window to start Virtual Radar type:
mono VirtaulRadar.exe
Here is my running Virtual radar, you will need to set yours up following the instruction below for the first time.
Under Feed Status, right click on Receiver and then select configure feed
copy the settings here in the screenshot
127.0.0.1 is the local loop back address on the pi
30003 is the port our SBS-1 server is running on.
click on OK or escape to go back to virtual radar
You can now max out your poor raspberry pi and try opening a web page to see the planes, or better still open a web browser on your pc / laptop to your raspberry pi address on port 8080
for example http://192.168.0.22:8080/VirtualRadar (note capital V and R)
You should not be able to see and monitor planes in the local area.
Wednesday, 30 March 2016
Subscribe to:
Posts (Atom)