Latest ISS sstv Tuesday 21:15-20

Greetings message via FunCube-1 to Chertsey radio club

QSL card from Funcube-1 A0-73

Fun cube and dashboard

We got given a FubCube Pro-Plus to play with so I set this up on a 2/70 co linear white stick antenna and installed funcube dashboard on windows 7 laptop 

You need to initially go into file--settings and in audio tab, change input device to *line Fun-cube Dongle V2.0*

each pass you will need to select the Frequency preset to the desired Fun-cube satellite you wish to monitor. In the Warehouse tab you will need to add your account details, you can register here

You can track fun-cube 1 satellite here

You can track fun-cube 2 satellite here 

Once set up you will want to put a check in the auto tune option on the bottom left of the screen.

Once the signal is heard you should start seeing Fitter messages come down the screen

You will also see that the dashboard is populated and updated.

Virtual Radar Server and Modes_RX *Funcube*

sudo apt-get install rtl-sdr

wget http://www.virtualradarserver.co.uk/Files/VirtualRadar.tar.gz
tar -zxvf VirtualRadar.tar.gz

To start listening to aircraft using the funcube pro-plus and to start a  SBS-1 compatible server on port 30003 type the following:

modes_rx -d -s osmocom -P

Hopefully you will see the following screen

You may see a few errors here but as long as you get some data all is good. Experiment with a better antenna, etc.






Now if you have already installed MONO skip to step X below

Installing Mono 4

sudo sh -c "echo 'deb http://plugwash.raspbian.org/mono4 jessie-mono4 main' >> /etc/apt/sources.list"
apt-get update

sudo apt-get install mono-complete

Now create a file using your favourite editor in the same directory where you just downloaded virtual radar to

create a file called: VirtualRadar.exe.config
copy and save the below text.

<?xml version="1.0"?>
<configuration>
    <configSections>
    </configSections>
    <startup>
        <supportedRuntime version="v2.0.50727"/>
    </startup>
    <runtime>
        <assemblyBinding  xmlns="urn:schemas-microsoft-com:asm.v1">
            <dependentAssembly>
                <assemblyIdentity name="Mono.Data.Sqlite"
                                  publicKeyToken="0738eb9f132ed756"
                                  culture="neutral" />
                <bindingRedirect oldVersion="2.0.0.0"
                                 newVersion="4.0.0.0" />
            </dependentAssembly>
        </assemblyBinding>
    </runtime>
</configuration>

Open a second terminal window to start Virtual Radar type:
mono VirtaulRadar.exe

Here is my running Virtual radar, you will need to set yours up following the instruction below for the first time.

Under Feed Status, right click on Receiver and then select  configure feed

copy the settings here in the screenshot
127.0.0.1 is the local loop back address on the pi
30003 is the port our SBS-1 server is running on.



click on OK or escape to go back to virtual radar







You can now max out your poor raspberry pi and try opening a web page to see the planes, or better still open a web browser on your pc / laptop to your raspberry pi address on port 8080

for example http://192.168.0.22:8080/VirtualRadar (note capital V and R)
You should not be able to see and monitor planes in the local area.