Monday, 17 April 2017

Online / Web based Kiwi SDR WSPR monitoring stations at your disposal

The new KIWI SDR allows users to share their station on-line and allow us to log in and tune around.

Go to the follow web page http://sdr.hu/ pick a location / SDR you want to use

On most of the stations you will have the control panel in the bottom left side of the screen, this will allow you to change band and mode, some of the HF stations have a box for extension, the last optin in there is WSPR and you can open a web based WSPR monitor. This could be useful to see if you are spotted at all?






Select WSPR option and the box below will also open on the screen.







Firstly select the band you wish to monitor.
Note if you choose to upload, the owners details are used. On some systems its quite slow to get the data decoded (3 minutes plus) but as you can see we do get some results.




If you visit the WSPR net web site you can search for the websdr call sign (in our case KH6ILT)



As you can see the spots have been uploaded and you can see good graphical representation linking each spot back to its location.










This is by far the simplest way we have found to pop up a WSPR monitoring station thanks to some dedicated SDR owners and to Kiwi for the software (and hardware of course) support.


Posted by at

Sunday, 16 April 2017

Mentions in the ICQ Amateur radio podcast today (Sunday 16 April)















at 2:40 minutes
Listen here



Posted by at

Friday, 14 April 2017

Wendover woods, looking at a SOTA site


As it was good Friday, I decided to take the Children on a bit of an adventure and head over to Wendover woods near High Wycombe / Chilterns / Amersham.

This is a national Trust site, has good facilities including on site lots of parking for about £4, reasonable toilet, and a cafe.

The Children are kept entertained by a large play park, several trails, which they can take part in building camps and searching for the infamous Gruffalo 



This stone is placed t mark the summit of the hill.




Bob M6FLT with his home made 2/70 yagi and the Arrow antenna (CQ sats)


Bob M6FLT using the HF in the mobile, much needed coffee break and warm up





M0JFP Arrow antenna and baofeng handie working So-50




The arrow antenna taking a break....


Posted by at

Wednesday, 12 April 2017

M6FLT/KG7VZD Homemade baby yagi for 70cm band

Homemade baby yagi for 70cm band





Posted by at

Tuesday, 11 April 2017

Phoenix DMR repeater network now available via the DV4-mini and other dongles.

At long last you can now use your dv4-mini, sharkrf and DV mega etc to access the (local for us) Phoenix repeaters / talk groups. This should give DMR a little bit of a kick start and hopefully allow a bit more activity on the local repeaters and allow more interaction from abroad.

DV4Mini

In the DV4mini control panel software, click on the “Expert Settings” tab and under “Choose nearest DMR Master:” select Phoenix-C.






From the DVControl tab you can then select “DV4mini Settings” DMR+, and from the TS2 Reflector list select “4404” for access to TG840.

SharkRF OpenSpot

Log into the web interface and select the “Connectors” tab. Select DMR+. From the Server list, select “Phoenix-C”. 


DVMega

Currently only connection to our network via the MMDVMHost application is possible. When setting up the MMDVMHost software you will need to edit the MMDVM.ini file to point to our Master server. Under the section “[DMR Network]” set the following settings.
[DMR Network]
Enable=1
Address=109.69.105.88
Port=55555
Jitter=300
# Local=3350
Password=PASSWORD
# Options=
RSSI=0
Slot1=0
Slot2=1
Debug=0
If you would like the DVmega to automatically connect to reflector 4404 for use on TG840 remove the “#” before “Options=” and change the line to say.
Options=StartRef=4404;RelinkTime=60;UserLink=1
StartRef = Initial Reflector
RelinkTime = If you change reflector this is the timeout before it switches back to 4404
UserLink = Whether reflectors can be changed via private calls from a radio.
You will need to use the 24112016 version (latest as of 28th Nov 2016) for the Options to work. A windows 32bit version of the MMDVMHost.exe can be found HERE. It should replace the current windows version you are using (rename existing or backup).

for updates and latest information refer to : http://www.dmr-uk.net/index.php/hotspots/


Posted by at
Subscribe to: Posts (Atom)